Category Archives: Signal Processing

Moving stuff across the country

Posted on by
Reply

I most certainly had a busy “reading week”.  It started with finishing up a job My brother Mike started.  Moving 7 pallets of equipment from my moms garage in Saskatoon.    Followed by great visits with Family and friends.  I’m sorry I did not get the chance to meet with everyone I had planned to visit with.  Things got a little busy in the IT support world and there was so much family to visit!

IMG_7560
 Three consoles were packaged and palleted up for shipment across the country.

2014-10-21 11.04.36 2014-10-21 11.04.22-1
 Custom made dollies were built for the two large sections of console frames.

2014-10-21 11.04.16

Modules were packed, boxed and palleted.  A small fortune in bubble wrap and pallet wrap were employed. 
 2014-10-21 11.04.33-2This is the PSU for a console along with a 1″ Studer A80 8 track Recorder that was made transportable.
I’m excited to work on these projects again in my “Spare time”

Stay tuned for updates of what’s happening with this lot.  We’re very excited for what’s planned :-)

McDSP ultimate Compressor and Eq

Posted on by
Reply

Today I had the good fortune of meeting with Derek Heimlich of McDSP. Derek introduced me to a solution to a grief I’ve always had with software plugins. After his introduction and chat about this product, I blurted out that “Software has sucked, until now”

McDSP has released the 3060 Ultimate Compressor and 6020 Ultimate Equalizer bundles.

Until now no software allowed users to switch the character of an equalizer and compressor without loosing their settings. Modeled after some of the industries most revered equipment, McDSP comes through with another must have studio essential tool. This functionality gives you a true A/B between different compressors and equalizers. A unique experience. “I know what I want to achieve when I compress and eq, all I ever want to do is change the character”. As far as I know this is the only piece of software that keeps the EQ and compression setting between plugins. A+ work in my opinion.

I would suggest you give them a shot today for your next project. McDSP offers a free demo that is a worthwhile experience and great investment, check it out.


6020_EQ_parade_resnominee
6030_parade-e1381352556993

Joel Plaskett rocking some WBS pre-amps

Posted on by
Reply

I was reading http://professional-sound.com/ (like I do every month plug plug) and saw Joels lovely new studio and Neve Console.  Front an centre I was happy to see the set of WBS pre-amps I wired up for him a few years ago.   Glad they’re making great records! And congrats to Thomas, who was apparently a regular at Revolution Recording… I just kept my head down and in the backScreen Shot 2014-08-21 at 1.48.31 PM Screen Shot 2014-08-21 at 1.48.56 PM

RLC calculator for components in series

Posted on by
Reply

I’ve been calculating a lot of components in series lately for an ECR255 class. I’ve also had to graph them on impedance diagrams and a power triangle.

In an effort to better understand the math I made a calculator for myself. Here is it for you to use and enjoy. If you see any problems please let me know. It was designed in excel 2011 for mac… there WILL be compatibility issues and I hope they’re minor.

How it works:

You can fill int the info you have in the orange boxes. Once the boxes are filled in the calculator should fill in the rest.

If you need to modify anything else, it’s all dependant on the orange boxes. I suggest a goal seek by modifying and orange cell.

Screen Shot 2014-07-06 at 9.36.44 PM

 

 

 

Screen Shot 2014-07-06 at 9.38.09 PM

Screen Shot 2014-07-06 at 9.48.54 PMScreen Shot 2014-07-06 at 9.49.10 PM

 

Screen Shot 2014-07-06 at 9.49.00 PM

Screen Shot 2014-07-06 at 9.49.16 PM

APKaudio STUDIO/BROADCAST/THEATRE/TOURING/REMOTE MICROPHONE CABLE KIT CALCULATOR

Posted on by
Reply

I’ve been building cables for over 15 years now and I’ve finally created a small calculator to estimate the costs of making an XLR cable. In the process, I am now offering cable construction services to help pay for going back to school.

The prices are very competitive while the quality is second to none.

If you’re interested in getting a quote, please send me an email and I’ll shoot you the excel calculator. 4483@APKaudio.com
Screen Shot 2014-06-25 at 12.52.17 AM

I’ve had nothing but good luck and good feedback about the Microphone Cables I’ve made available for rental. All of the cables are Mogami Negflex Quad Microphone with Neutrik NC3-XX connectors.

Recommended for most small to mid size recording studios:
8 4′
8 8′
16 16′
16 24′
4 48′
2 96′

I’ve been asked to estimate a few kits, so a simple calculator has been created to help you estimate the costs of your build.

All Cables include ID Heatshrink, coloured boots and rings, and Panduit Velcro Cable tie.

Free use of APKaudio loaner Microphone cable package available while yours is being built.

3 weeks lead time needed to build your order. Cable subject to availability.

Get $5 trade in on all of your old XLR microphone cable! All used cables get donated to a high school tech club

100% Satisfaction Guarantee.
I do not want you to have something from APKaudio that you are not satisfied with.

Wednesday night TV

Posted on by
Reply

Check out Jörg Wuttke, Understanding Microphones

Jörg Wuttke was born in Berlin in 1942. He studied electronics and telecommunications at Karlsruhe University, specializing in acoustics, and was teaching assistant to professor Günther Kurtze, the inventor of the shotgun microphone. He joined Schoeps GmbH as a research engineer in 1970, became its chief engineer in 1972, and is now its technical director.
Mr. Wuttke has been an active member of the Audio Engineering Society for many years, including publishing in the AES Journal and presenting papers and chairing workshops at conventions. In1993 he was awarded an AES Fellowship. Since 1972, he has been a member of the DIN standards committee on microphones and headphones. He maintains an avid interest in listening to music and recording live concerts.

4 racks of gear loaded up for sale

Posted on by
4

Loading up the studio on the last night  got some AA stickers with numbers to follow!  Most of this stuff is for sale with the exception of a few things…

2014-04-30 21.42.47

Rack 1
http://audioaholics.com/item/267
http://audioaholics.com/item/137
http://audioaholics.com/item/36

2014-04-30 21.37.24

Rack 2

http://audioaholics.com/item/99
  http://audioaholics.com/item/49
http://audioaholics.com/item/139

2014-04-30 21.46.01Rack 3

http://audioaholics.com/item/264
http://audioaholics.com/item/99
http://audioaholics.com/item/262
http://audioaholics.com/item/263
http://audioaholics.com/item/49
http://audioaholics.com/item/139

2014-04-30 21.39.07Rack 4
http://audioaholics.com/item/25
http://audioaholics.com/item/175
http://audioaholics.com/item/176
http://audioaholics.com/item/255