Holy crap… moving sucks. 
Cleared out of the Revolution Recording Custom shop. Continue reading
Moved
10
Category Archives: Repair
A project I’ve been working on has come… full circle ;-)
Congrats to Kevin Park and the Lacquer channel team for getting the Neumann VMS70 back in the game. A fantastic project to have been a part of! We recapped the entire audio electronics for Kevin before he had lathe aficionado Chris Muth calibrate it. It’s a fine precision piece of audio electronics and Kevin is one HELL of a lathe mechanic and cutting engineer! It, and he, are in good hands over at Toronto’s Lacquer Channel. I’m excited to cut a few plates myself!
Photo and story here: http://www.thegridto.com/culture/music/play-it-as-it-lathes/
Did you see it?
Many Thanks to Dave, Jose, and Tyler for their help and enthusiasm about the project!
A test fit of buckets one and two
had a brief test fit this evening…
Sound guy xmas idea #2 – Drive-Loc Master Tech Set
Here is a great set of screw and nut drivers every tool kit should have. They are compact lightweight and consistent. I can carry 20 drivers for the same weight as 5 full sized drivers. I really like that they can also fit in a drill.
http://www.wihatools.com/200seri/281_Driveloc_Blades.htm
Munchy Crunchy and Intermittent
Thoughts?
1AM dead caliper battery – improvise
My caliper battery died while working late. I looked in storage and swore there was one there, no success. Two AA cells later I was back in the game! 
Neumann cutting lathe acceleration limiter
Here are some before shots of the Neumann cutting lathe acceleration limiter BSB-74
It’s a really work of art in there, had to share.
Continue reading
Neumann VMS-70 Cutting Lathe Restoration
Boy am I excited to have been a part of a restoration of a Neumann VMS-70 Cutting lathe. It is currently being setup at Tonronto’s Lacquer Channel and undergoing calibration. I have more pictures to post as we’re done a complete overhaul of all caps and power supplies. More to come… 
2013015 – Orange “CH ON” buttons
I recently got a bunch of blank switch buttons. I wanted some new CH ON Buttons in APK orange… this is what I came up with.
Drilling into drywall? – This life hack is amazing
All that time I spend on Reddit finally paid off with this life pro tips.
Thought I’d share how it saved me from pulling out the vacuum
Searching for a small reverb tank… 1BB3C1B – Who hoards these?
I’m repairing a Yamaha PG-1 guitar pre-amp and am in need of a reverb tank
The model # I have is 1BB3C1B
1 – Type 1
B – Input Impedance 150 Ohm
B – Output Impedance 2,250 Ohm
3 – decayLong (2.75 to 4.0s)
C – Input Insulated/Output Grounded
1 – No Lock
B – Horizontal Open Side Down
The spring had come apart inside and the other spring must have broken in the past and was removed.
let me know if you have something similar!
WBS T1202A in for a cleaning
Dave got his hands a little dirty in the cleaning of a clients T1202A. Very good little task out of the way. While it was in I snapped a few pics for the archive :-) I would have named it a T1202C as it has C revision Modules…
Here is a link to the Ward-Beck Systems T1202A
New console vacuum
I got a new console vacuum today! Backpack Dayton 4TR09… and it kicks serious ass! I hate eBay… but this was the best $125 I’ve spent in a while
Hohner Bass 3 in for a tune up
My Brother sent me this flea market gem. The power on the schematic was wrong, a cap lead had come undone and it needed some TLC. The output is very low and I may build a little pre-amp for it… 
Fader Butter
Was Cleaning some old faders when….
Big Jenny is a 15 track!
Studer A101 chips that blew up
Does anyone know where I can get these mini bulbs?
Does anyone know where I can get these mini bulbs?
Looking for Bulbs for a Studer A80 Ready and Rec lights
so small
Big Jenny Restoration
Just when I think there is NO hope for a machine… MAGIC
Many more than zero tracks reproduce!
It’s almost an 8 track again… 
Peggy Sue Rough Functional
I’ve been working on a new functional digram for Peggy sue to explain to a client what it could become. It’s slowly taking shape, and I like where it’s going. Im looking for some parts… I may have to put out an APB when the design is finalize
Some buddies
Doing some calibration the other day and I brought old Faithful: B and K Tone Generator and HP 400FL meter. I modified the backs to have XLR connectors and the meter has an isolation transformer in it. Can’t work without them!
