We had a chunk on Monster Cable “Interlink Reference 2 High Resolution total bandwidth balance Audio Interconnect cable with Micro fiber” and a piece of solder in the shop… so we put them through the audio precision.
guess which one is the solder
There has been talks of 12 channel consoles being made so designs are moving from paper to cad… I’ve been dreaming up a new design of side panel that can lay flay or be stood upright using a support. The idea is to put them on an island in either upright or flat positions. The faders would be flat in the mix position, and angled in the upright position. The back interconnect would be all edacs.
The demands only grow as the systems do.
Red – XLRF – TRS
Blue – XLRM – TRS
Green – ground lift
Yellow – polarity inverter
Violet – XLRM – XLRM
Black Expando – XLRF – XLRF
Orange – XLR to TS
I got a new console vacuum today! Backpack Dayton 4TR09… and it kicks serious ass! I hate eBay… but this was the best $125 I’ve spent in a while
Was Cleaning some old faders when….
Containing the best charts of their kind available anywhere, this free user-interactive applet is built around two main charts; one showing the overall frequency ranges of the various musical instruments and another showing the average sensitivity of the human ear to frequency across the frequency spectrum. Chock full of displayed and mouse-over information detailing many important characteristics of the specific instruments and the various frequency ranges.uency and Gain
Having trouble distinguishing your dBVU from your dBFS? Do you set your recording levels by the meters but the levels just don’t come out the way you think they should? One of the “secrets” of the pros for making quality recordings is knowing how to read and set signal levels throughout the recording chain to get the most out of both the signal and the gear. This free on-line applet explains the fundamentals of this subject in an interactive, step-by-step way.
I took a crack at having something water cut to see what the quality of the cut was…
It was very accurate
This is the front cut
But…the back was a little rough
Does anyone know where I can get these mini bulbs?
Looking for Bulbs for a Studer A80 Ready and Rec lights
so small
looking for something in the $150 – $300 range… any suggestions?
http://www.ortofon.com/products/cartridges/cartridges-2m-series/2m-bronze
Just when I think there is NO hope for a machine… MAGIC
Many more than zero tracks reproduce!
It’s almost an 8 track again… 
A few years ago I made another Sub-Kick. I used all Yamaha Parts… so I guess it’s a Yamaha Sub Kick
Drilling the XLR into the side:
Pulling the driver from its box:
I built some Brackets and drilled the holes to line up with the existing lug hardware:
Mesh head:
Filled the lining of the shell with acoustic foam and put another mesh head on the back:
Finished:
I’ve been working on a new functional digram for Peggy sue to explain to a client what it could become. It’s slowly taking shape, and I like where it’s going. Im looking for some parts… I may have to put out an APB when the design is finalize
I had to make a change to a domain name and brand.
WhateverTheFuckYouWant.ca was getting blocked by corporate firewalls so I will be renaming rebranding the web store to AudioAholics.com
The objective is to have an alternative place to sell audio equipment / parts to eBay and Kijiji They are evil. It is a free service for all to enjoy and list.
Got a order of APK orange locks coming in from a good friend. All keyed the same, with a few keys to spare. Thanks Mossman!
